Overview
1-2 hp Turf Boss Features:
- Self-priming design, with the ability to lift water from a depth of 25 feet.
- Easily serviced through a back pull-out design, which leaves the plumbing and both the pump’s base and case undisturbed in their original location.
- Rugged pump case constructed with heavy-duty cast iron ensures optimum durability, quiet operation, and long life.
- Hydraulic components molded with Modified PPO thermoplastic, when coupled with the floating stainless steel impeller eyeseal, ensures dependable and efficient operation.
- Available with a 304 stainless steel impeller for maximum durability.
- Industry proven indoor and outdoor 56-J motors.
- Single-phase: 1 and 1.5 hp motors are dual voltage, set to run with either 115 or 230 V incoming power (2 hp is 230 V only).
- Mechanical shaft seal allows positive protection against leaking.
- Built-in drain plug for easy winterizing and servicing.
- Shut-off pressures up to 130 feet, and flow rates to 70 GPM.
- Handles water temperatures up to 120 °F.
- Integral 1" NPT priming plug.
- 1.5" NPT suction, 1.5" NPT discharge.
3-5 hp Turf Boss Features:
- Volute: Built-in suction check valve facilitates priming and prevents back flow or siphoning
- Impeller: 304 stainless steel, combining efficient operation with durable construction to allow for use in a broad range of pumping applications.
- Seal: Standard carbon/ceramic faces, FKM elastomers, 300 series stainless components.
- Diffuser: Cast iron diffuser is utilized in all models, improving pump efficiency
- Motor: Standard JM Frame Motors
Applications:
- Irrigation
- Construction
- Commercial
- Municipal
- Light Industrial
- Residential
- Water Transfer
Order Information
Turf Boss Single Phase Model
| Model | HP 60Hz | Phases | Volts | Motor Enclosure |
|---|---|---|---|---|
| FTB1CI | 1 hp | Single-Phase | 115 VAC / 230 VAC | ODP |
| FTB1CI-SSI | 1 hp | Single-Phase | 115 VAC / 230 VAC | ODP |
| FTB15CI | 1.5 hp | Single-Phase | 115 VAC / 230 VAC | ODP |
| FTB15CI-SSI | 1.5 hp | Single-Phase | 115 VAC / 230 VAC | ODP |
| FTB2CI | 2 hp | Single-Phase | 230 VAC | ODP |
| FTB2CI-SSI | 2 hp | Single-Phase | 230 VAC | ODP |
| FTB3CI | 3 hp | Single-Phase | 115 VAC / 230 VAC | ODP |
| FTB3CI-E | 3 hp | Single-Phase | 115 VAC / 230 VAC | Totally Enclosed Fan Cooled |
| FTB5CI | 5 hp | Single-Phase | 230 VAC | ODP |
| FTB5CI-E | 5 hp | Single-Phase | 230 VAC | Totally Enclosed Fan Cooled |
Turf Boss Three Phase Model
| Model | HP 60Hz | Phases | Volts | Motor Enclosure |
|---|---|---|---|---|
| FTB1CI-SSI-T | 1 hp | Three-Phase | 230 VAC / 460 VAC | ODP |
| FTB15CI-SSI-T | 1.5 hp | Three-Phase | 230 VAC / 460 VAC | ODP |
| FTB2CI-SSI-T | 2 hp | Three-Phase | 230 VAC / 460 VAC | ODP |
| FTB3CI-T | 3 hp | Three-Phase | 230 VAC / 460 VAC | ODP |
| FTB3CI-TE | 3 hp | Three-Phase | 230 VAC / 460 VAC | Totally Enclosed Fan Cooled |
| FTB3CI-T5E | 3 hp | Three-Phase | 575 VAC | Totally Enclosed Fan Cooled |
| FTB5CI-T | 5 hp | Three-Phase | 230 VAC / 460 VAC | ODP |
| FTB5CI-TE | 5 hp | Three-Phase | 230 VAC / 460 VAC | Totally Enclosed Fan Cooled |
| FTB5CI-T5E | 5 hp | Three-Phase | 575 VAC | Totally Enclosed Fan Cooled |
Turf Boss Pump End Kits
Cast Iron Volute. Service Factor Rating, Motor Frame, & Impeller all listed within each item page.
| Model | HP 60Hz | Motor NEMA Frame Type |
|---|---|---|
| TB1CI-PE | 1 hp | 56J C Face |
| TB15CI-PE | 1.5 hp | 56J C Face |
| TB2CI-PE | 2 hp | 56J C Face |
| TB1CI-SSI-PE | 1 hp | 56J C Face Thrd Shaft |
| TB15CI-SSI-PE | 1.5 hp | 56J C Face Thrd Shaft |
| TB2CI-SSI-PE | 2 hp | 56J C Face Thrd Shaft |
| FTB3CI-PE | 3 hp | 145 -184JM |
| FTB5CI-PE | 5 hp | 145 -184JM |
*If you purchase a pump end kit without a factory supplied motor, you are responsible for ensuring that the motor driver has a sufficient horsepower and service factor rating to adequately handle the pump horsepower load across the spectrum of the operating curve.
Support Material
Featured Downloads
Catalogs
| Residential/Light Commercial Surface Pumps Catalog | |
| Replacement Parts Catalog |
Manuals
| FPS Engineering Manual |