Overview
Features & Benefits
- Pump diameter is smaller than a standard 4-inch submersible for easier installation in reduced diameter 4-inch wells.
- Hex rubber bearing and ceramic shaft sleeve allows sand and abrasives to pass through, virtually eliminating shaft wear and upper bearing failures.
Improved hydraulic performance for deeper set depths at all horsepower and flow ratings.
- Floating stage design allows for maximum efficiency while minimizing the downthrust load that is transferred to the motor.
- Modified PPO diffuser and disc with 300 Series stainless steel thrust and eye seal protection for durability and abrasion resistance.
- Acetal impeller provides high performance to increase pressure output while reducing system losses from friction.
- Removable spring-loaded check valve.
- Stainless steel pump intake screen and stainless steel cable guard.
- Maximum water temperature: 120 °F / 49 °C.
- Powered by corrosion-resistant Franklin Electric submersible 4-inch motor with lightning protection.
Support Material
Featured Downloads
Brochures
| Water Systems Products and Applications Brochure | |
| Beyond the Pump Tools Services Brochure |
Catalogs
| Replacement Parts Catalog |
Manuals
| AIM Manual | |
| AIM Manual Addendum | |
| Form 2207 Submersible Motor Install Record | |
| FPS Engineering Manual |
Certifications
| NSF/ANSI 61 Water Quality Approval Document |
Order Information
2-Wire Thermoplastic Pumps
| Flow | HP 60Hz | Shut Off 60 Hz | Stages | Volts | Model |
|---|---|---|---|---|---|
| 5 gpm | 1/2 hp | 390 ft | 13 | 115 VAC | 5FR05P4-2W115 |
| 5 gpm | 1/2 hp | 390 ft | 13 | 230 VAC | 5FR05P4-2W230 |
| 5 gpm | 3/4 hp | 541 ft | 18 | 230 VAC | 5FR07P4-2W230 |
| 7 gpm | 1/2 hp | 324 ft | 10 | 115 VAC | 7FR05P4-2W115 |
| 7 gpm | 1/2 hp | 324 ft | 10 | 230 VAC | 7FR05P4-2W230 |
| 7 gpm | 3/4 hp | 421 ft | 13 | 230 VAC | 7FR07P4-2W230 |
| 10 gpm | 1/2 hp | 353 ft | 11 | 115 VAC | 10FRD05P4-2W115 |
| 10 gpm | 1/2 hp | 353 ft | 11 | 230 VAC | 10FRD05P4-2W230 |
| 10 gpm | 3/4 hp | 455 ft | 14 | 230 VAC | 10FRD07P4-2W230 |
| 10 gpm | 1 hp | 618 ft | 19 | 230 VAC | 10FRD1P4-2W230 |
2-Wire Stainless Steel Pumps
| Flow | HP 60Hz | Shut Off 60 Hz | Stages | Volts | Model |
|---|---|---|---|---|---|
| 5 gpm | 1/2 hp | 390 ft | 13 | 115 VAC | 5FR05S4-2W115 |
| 5 gpm | 1/2 hp | 390 ft | 13 | 230 VAC | 5FR05S4-2W230 |
| 5 gpm | 3/4 hp | 541 ft | 18 | 230 VAC | 5FR07S4-2W230 |
| 5 gpm | 1 hp | 666 ft | 22 | 230 VAC | 5FR1S4-2W230 |
| 5 gpm | 1.5 hp | 899 ft | 30 | 230 VAC | 5FR15S4-2W230 |
| 7 gpm | 1/2 hp | 324 ft | 10 | 115 VAC | 7FR05S4-2W115 |
| 7 gpm | 1/2 hp | 324 ft | 10 | 230 VAC | 7FR05S4-2W230 |
| 7 gpm | 3/4 hp | 421 ft | 13 | 230 VAC | 7FR07S4-2W230 |
| 7 gpm | 1 hp | 586 ft | 18 | 230 VAC | 7FR1S4-2W230 |
| 7 gpm | 1.5 hp | 752 ft | 23 | 230 VAC | 7FR15S4-2W230 |
| 10 gpm | 1/2 hp | 353 ft | 11 | 115 VAC | 10FRD05S4-2W115 |
| 10 gpm | 1/2 hp | 353 ft | 11 | 230 VAC | 10FRD05S4-2W230 |
| 10 gpm | 3/4 hp | 455 ft | 14 | 230 VAC | 10FRD07S4-2W230 |
| 10 gpm | 1 hp | 618 ft | 19 | 230 VAC | 10FRD1S4-2W230 |
| 10 gpm | 1.5 hp | 765 ft | 24 | 230 VAC | 10FRD15S4-2W230 |
3-Wire Thermoplastic Pumps
| Flow | HP 60Hz | Shut Off 60 Hz | Stages | Volts | Model |
|---|---|---|---|---|---|
| 5 gpm | 1/2 hp | 390 ft | 13 | 115 VAC | 5FR05P4-3W115 |
| 5 gpm | 1/2 hp | 390 ft | 13 | 230 VAC | 5FR05P4-3W230 |
| 5 gpm | 3/4 hp | 541 ft | 18 | 230 VAC | 5FR07P4-3W230 |
| 7 gpm | 1/2 hp | 324 ft | 10 | 115 VAC | 7FR05P4-3W115 |
| 7 gpm | 1/2 hp | 324 ft | 10 | 230 VAC | 7FR05P4-3W230 |
| 7 gpm | 3/4 hp | 421 ft | 13 | 230 VAC | 7FR07P4-3W230 |
| 10 gpm | 1/2 hp | 353 ft | 11 | 115 VAC | 10FRD05P4-3W115 |
| 10 gpm | 1/2 hp | 353 ft | 11 | 230 VAC | 10FRD05P4-3W230 |
| 10 gpm | 3/4 hp | 455 ft | 14 | 230 VAC | 10FRD07P4-3W230 |
| 10 gpm | 1 hp | 618 ft | 19 | 230 VAC | 10FRD1P4-3W230 |
3-Wire Stainless Steel Pumps
| Flow | HP 60Hz | Shut Off 60 Hz | Stages | Volts | Model |
|---|---|---|---|---|---|
| 5 gpm | 1/2 hp | 390 ft | 13 | 115 VAC | 5FR05S4-3W115 |
| 5 gpm | 1/2 hp | 390 ft | 13 | 230 VAC | 5FR05S4-3W230 |
| 5 gpm | 3/4 hp | 541 ft | 18 | 230 VAC | 5FR07S4-3W230 |
| 5 gpm | 1 hp | 666 ft | 22 | 230 VAC | 5FR1S4-3W230 |
| 5 gpm | 1.5 hp | 899 ft | 30 | 230 VAC | 5FR15S4-3W230 |
| 7 gpm | 1/2 hp | 324 ft | 10 | 115 VAC | 7FR05S4-3W115 |
| 7 gpm | 1/2 hp | 324 ft | 10 | 230 VAC | 7FR05S4-3W230 |
| 7 gpm | 3/4 hp | 421 ft | 13 | 230 VAC | 7FR07S4-3W230 |
| 7 gpm | 1 hp | 586 ft | 18 | 230 VAC | 7FR1S4-3W230 |
| 7 gpm | 1.5 hp | 752 ft | 23 | 230 VAC | 7FR15S4-3W230 |
| 10 gpm | 1/2 hp | 353 ft | 11 | 115 VAC | 10FRD05S4-3W115 |
| 10 gpm | 1/2 hp | 353 ft | 11 | 230 VAC | 10FRD05S4-3W230 |
| 10 gpm | 3/4 hp | 455 ft | 14 | 230 VAC | 10FRD07S4-3W230 |
| 10 gpm | 1 hp | 618 ft | 19 | 230 VAC | 10FRD1S4-3W230 |
| 10 gpm | 1.5 hp | 765 ft | 24 | 230 VAC | 10FRD15S4-3W230 |
Stainless Steel Pump Ends
| Flow | HP 60Hz | Stages | Shut Off | Model |
|---|---|---|---|---|
| 5 gpm | 1/2 hp | 13 | 390 ft | 5FR05S4-PE |
| 5 gpm | 3/4 hp | 18 | 541 ft | 5FR07S4-PE |
| 5 gpm | 1 hp | 22 | 666 ft | 5FR1S4-PE |
| 5 gpm | 1.5 hp | 30 | 899 ft | 5FR15S4-PE |
| 5 gpm | 2 hp | 38 | 1152 ft | 5FR2S4-PE |
| 7 gpm | 1/2 hp | 10 | 324 ft | 7FR05S4-PE |
| 7 gpm | 3/4 hp | 13 | 421 ft | 7FR07S4-PE |
| 7 gpm | 1 hp | 18 | 586 ft | 7FR1S4-PE |
| 7 gpm | 1.5 hp | 23 | 752 ft | 7FR15S4-PE |
| 7 gpm | 2 hp | 30 | 969 ft | 7FR2S4-PE |
| 7 gpm | 3 hp | 38 | 1237 ft | 7FR3S4-PE |
| 10 gpm | 1/2 hp | 11 | 353 ft | 10FRD05S4-PE |
| 10 gpm | 3/4 hp | 14 | 455 ft | 10FRD07S4-PE |
| 10 gpm | 1 hp | 19 | 618 ft | 10FRD1S4-PE |
| 10 gpm | 1.5 hp | 24 | 765 ft | 10FRD15S4-PE |